-
1.Create a silicone mold of the silver prototype using resin
-
1-2. Create a silicone mold of the silver prototype using resin
-
2.Make a silicone mold for creating wax models from the silver prototype
-
2-2.Make a silicone mold for creating wax models from the silver prototype
-
3.Remove the silver prototype from the silicone mold
-
4.The silicone mold for creating wax models is ready
-
4-2.The silicone mold for creating wax models is ready
-
5.Create wax models from the silicone mold
-
5-2.Create wax models from the silicone mold
-
6.Complete the wax model that will become the jewelry
-
7.Assemble a wax tree with other product wax models
-
7-2.Assemble a wax tree with other product wax models
-
8.Place the assembled wax tree into a cylinder
-
9.Prepare the plaster
-
10.Pour the plaster into the cylinder
-
11.Wait for the plaster to harden and the wax to melt, forming the mold
-
12.Cast the metal into the plaster mold where the wax has melted
-
13.Separate the cast metal pieces from the metal tree
-
13-2.Separate the cast metal pieces from the metal tree
-
14.Polish and finish using files and rotary tools
-
15.Complete the metal setting
-
15-2.Complete the metal setting
-
16.Set the stones to finish the product
-
17.Final polishing after stone setting
-
18.Stone setting
-
18-2.Finished product